Used Ebiach Pro on 2003 sport sedan.

[BILLYDKID]

The car looks great and seems to ride a little stiffer. However, I am still trying to get help on the camber issue. When I did the alignment, they got toe back within man. specs. However, the camber is off in front and rear. The rear has adjustments from factory and were pulled in to -2.0 on left and right. They were out to -2.6 before alignment.

The front is out as well with no adjustments. Can anyone tell me if this is to far out. You can notice the camber being off by just looking at the car.

Please give me any feed back possible. Camber kits? or am I within limit to not eat tires.

[Canton_G35]

I think RugRat and Chops got their's pretty close to being within spec but I'm not sure.

but there are a number of different camber correction parts you can get for the front and rear.

give our sponsors a call, cause I think they can get what you're looking for. They might not have them on their website so you really need to call.

[kenchan]

I haven't played around with the sports sedans, but on my coupe the rear is
set at -2.6. The car would not settle coming out of fast turns at -1.4 (where I
originally had it after stillen rods). Im using lowering springs, strut/shocks, and
f/r swaybars.

just for your reference.